MOBILE MEASUREMENT OF POWER QUALITY
Mobile measurements are usually used for measurement campaigns over time as well as for fault location. To select the right mobile meter, the level of available expertise as well as the application should be taken into consideration. For very extensive analyses and troubleshooting, it is recommended to consult a Power Quality specialist.
LINAX®PQ5000CL-MultiPQ (AC)
Mobile device for monitoring load flows & power quality in case of multiple currents in the low voltage network.
• Power quality analysis in class A, according to IEC 61000-4-30 Ed. 3 (metrologically certified)
• Up to 36 current inputs on one instrument
• Analysis of harmonics / interharmonics for all currents
• Disturbance recorder for voltage and current events
• Comprehensive load profile recording
LINAX PQ5000 MOBILE (AC)
Mobile PQ measurement technology certified for class A and active energy
Mobile device for monitoring the power quality in electrical networks
• Power quality analysis in class A, according to IEC 61000-4-30 Ed. 3 (metrologically certified)
• Power quality compliance reports via website
• User LAN/WLAN interface via PC, Laptop, Tablet and Smartphone
PQA 8000H (AC/DC)
Mobile power quality measurement
Current and voltage measurements up to 500 kHz
• Power quality analysis in class A according to IEC 61000-4-30 Ed. 3
• Supraharmonic 8 – 500 kHz (IEC61000-4-30)
• 0.05% accuracy / 500 kHz bandwidth over 20 measuring ranges from 20mV to 1600V
MAVOWATT 230 (AC/DC)
Mobile PQ measurement technology in class A with transient detection from 32 / 40 µs
Three-phase energy and mains disturbance analysers
– Power quality analysis in class A according to IEC 61000-4-30 Ed. 3
– Transient detection from 32 / 40 µs (50 / 60 Hz)
– Capture harmonics and interharmonics U (127), I (63)
MAVOWATT 240 (AC/DC)
Mobile PQ measurement technology in class A with transient detection, incl. WiFi and advanced features
All Mavowatt 230 functions plus:
– WiFi communication
– Answer modules for automatic reporting of power quality events
– Recording before and after an event of 10 000 cycles
MAVOWATT 270-400 (AC/DC)
Mobile PQ measurement technology High Resolution and 400Hz
All Mavowatt 240 functions plus:
• Transient detection with high speed of 1 µs
• Advanced Energy Monitoring according to IEEE 1459
• 400 Hz monitoring
MAVOWATT 270-400 (AC/DC)
Mobile PQ-Messtechnik High Resolution und 400Hz
Alle Mavowatt 240 Funktionen sowie:
• Transient detection with high speed of 1 µs
• Advanced Energy Monitoring nach IEEE 1459
• 400 Hz Monitoring
MAVOWATT 30 (AC/DC)
Mobile PQ measurement technology in lightweight design
8-channel mains disturbance analyser
– Power quality analysis in class A according to IEC 61000-4-30 Ed. 2
– Transient detection from 80 µs
– Lightweight with only approx. 1.9 kg
HDPQ VISA / GUIDE / XPLORER / XPLORER 400 SP (AC/DC)
PQ measuring technology for stationary as well as mobile application with self-supply function
Contains all the functions of the corresponding Mavowatt 2xx series units, but:
– No display, operation via tablet / PC / smartphone
– Power supply via measuring inputs
– Protection class IP65
Power/energy logger & PQ detection (dips, swells, interrupts, and current changes and harmonics)
DranXperT (AC)
Power logger and PQ detector
• 3-phase, bi-directional power/energy logger
• Detection and recording of common PQ problems
• Web browser interface & free software for analysis and reporting
• 7h battery runtime
And don’t forget…the possible accessories!
Current clamps
Rogowski-Coil
Secure gateway
GPS time synchroniser
Protective clothing
Clamps & Test Leads
Wide range power supply unit
Calibration
Software
Conclusion
Depending on the application and the available depth of expertise on the subject of power quality, different analysis devices can be used for observation and fault detection. The higher or lower the performance of a measuring instrument is set, the more or less this will be directly reflected in the purchase price. Mobile measurements can also serve as an additional source for fault detection in permanently installed systems.